Hookup Instructions For AT&T U-Verse Internet And TV | 1-866-405-0231

AT&T U-Verse is the fiber optic cable TV, Internet and phone service line of AT&T Corporation. The setting up process of AT&T U-Verse service depends on the service that you wish to hook up. It can be any one of AT&T U-Verse TV service, AT&T U-Verse Internet service or AT&T U-Verse phone service. Before installing […]

AT&T U-Verse is the fiber optic cable TV, Internet and phone service line of AT&T Corporation. The setting up process of AT&T U-Verse service depends on the service that you wish to hook up. It can be any one of AT&T U-Verse TV service, AT&T U-Verse Internet service or AT&T U-Verse phone service. Before installing any equipment, however, ATT U-Verse users should schedule an appointment with the AT&T Customer Support and ask for a U-Verse technician to come to their home and install the required cable wiring.

How To Hook Up U-Verse Set Top Box With TV

Step 1

Determine the connection ports available on your TV. To obtain the best results, you should connect the set-top box to your HDTV with the help of an HDMI cable. In case your TV does not have an HDMI port and has a DVI port instead, you connect it with the HDMI port on your set-top box with the help of an HDMI-to-DVI adapter. In this case, you will also be required to connect the audio ports with the help of RCA cables as DVI only transmits video.

Step 2

Connect the set-top box and TV with the help of a coaxial cable if your TV does not have an HDMI or DVI port. The coaxial cable should be connected to the “Out to TV” terminal of STB’s RF and the “Antenna In” terminal of the TV set’s RF.

Step 3

Further, you need to connect the TV to the set-top box with the help of three AV cables. One AV cable for video and two for audio. Connect the video/audio output from the set-top box to the corresponding input on your TV set. The yellow, white and red AV cables must be plugged into yellow, white and red (respectively) AV Output jacks on the set-top box and the yellow, white and red AV In jacks should be plugged in the TV set.

Step 4

Plug in the power cable of the set-top box into the “Power” jack situated at the back of the STB. After that, plug in the cable’s other end into an electrical power outlet. Switch on your STB and TV.

Step 5.

If you used a coaxial cable to connect the set top box to your TV, then set your TV to channel number 3. Set the video input of your television to the proper input option using the “Input” button of your TV remote. For example, if you have connected with HDMI, you need to use the HDMI input option on the input menu of your TV set.

How to Hook Up U-Verse Phone Service

Step 1

Connect the power connector or the battery backup pack to the power port present on the AT&T residential gateway. Plug in the power cord of the battery backup pack into an electrical power outlet.

Step 2

Connect one of the ends of the coaxial cable to the coaxial port present at the back of the ATT residential gateway and the other end to the cable wall electrical outlet that is installed by the AT&T U-Verse technician.

Step 3

Connect one of the phone jacks available on the wireless or residential gateway device with the phone jack at the base of your phone that is using a telephone cable.

Step 4

Finally, call on 877-377-0016 in order to activate your AT&T U-Verse phone service. Set up your service by following the voice prompts.

How to Hook Up U-Verse Internet Service

Step 1

Hook up your AT&T U-Verse Phone service with the wireless or residential gateway before you try to access the Internet service.

Step 2

Plug in one end of the Ethernet cable to one of Ethernet ports available on the wireless or residential gateway in order to connect without using the Wi-Fi. After that connect the other end of the Ethernet cable to the Ethernet port on your PC.

Step 3

Switch on your PC or a Wi-Fi device in your home. Choose its options of network connection. You can determine its network name or SSID by looking at the label beneath the wireless gateway. It should start with “ATT” followed by other 3 digits. Choose this network. When asked for a password, you need to enter the ten-digit number written inside the brackets on your wireless or residential gateway.

If you need any further assistance or facing any difficulty while hooking up the AT&T U-Verse services, you should call AT&T customer service for help. Their att tech team is round-the-clock available at the service of their customers with the best solutions at their fingertips.